﻿The data format of the load type feedback is specified here.

*Standard (KNX-compliant)*: The load type is reported in the standardised data format according to DPT 20.610.

*Extended*: The feedback of the load type is bit-oriented: "0" = undefined (no calibration possible because of missing mains voltage / short circuit) / "1" = trailing edge phase control (set by parameter) / "2" = leading edge phase control (set by parameter) / "3" = universal, calibrated to capacitive or resistive load / "4" = universal, calibrated to inductive load / "5" ... "255" not used
